D-Sharp
Description
The D-Sharp features four sharpening angles (17, 20, 25 and 30) in 600 grit diamond. It also has a fine 800 grit ceramic benchstone that can be used for polishing straight or serrated blades. Perfect as a Lansky System accessory, or as a stand-alone sharpening solution.
FEATURES:
- •4 sharpening angles (17º, 20º, 25º, and 30º)
- •Ceramic Benchstone for fine polishing and
- serrations
- •600 grit medium diamond pull-through slots
- •800 grit ceramic serrated mini benchstone
- •Durable metal casing
- •100% compatible with all Lansky Controlled-Angle Systems & Turn Boxes
Dimensions: 4.3" x 1.4" x .5"
Weight: 4.3oz
Instructions
1. Diamond V-grooves (600 grit): 17º, 20º, 25º and 30º
Holding the knife with your dominant hand, and using the other hand to hold the sharpener: pull the knife through the desired angle slot. Rinse blade after sharpening.
2. Ceramic Benchstone
The medium (800) grit ceramic element should be used in a benchstone type fashion, or like a butcher steel. The ceramic benchstone is harder than steel, will never wear out, and can be used often as the primary sharpening element of your D-Sharp. The Ceramic Benchstone is also tapered for sharpening serrated knives.
Eventually metal shavings will accumulate as dark streaks on the ceramic and will slow effectiveness. Clean with a Lansky EraserBlock.
3. Sharpening Serrations
Sharpen one serration at a time by pulling the ceramic element against the grooved side of the serration. For larger serrations: use a rolling motion to sweep the corner of the sharpener from one side of the serration to the other. Repeat until serration is sharp then move to the next serration.
