8
8"x2" Medium Diamond BenchStone - (overstock)
$36.99 $19.99

LDB8M

Description

8"x2" Medium Diamond Bench Stone

Key Features:

-100% Uninterrupted Diamond Coated Surface (280 grit)

-High-Impact Plastic Housing

-Non-Slip Rubber Base

-Screw Holes in Base for Bench Mounting

Lansky’s Diamond Bench Stones are designed for expert knife sharpening and woodworking tool care. All Lansky Diamond Bench Stones feature a full edge-to-edge diamond grit surface for quicker, more efficient sharpening, at a high-value. They are available in two sizes and five grits. 

-The Medium (280 grit) diamond surface is designed average touch-ups.  This grit has the ability to re-condition a bevel grind, at the same time leaving your blade with a serviceable and sharp edge. 

Grit Reference Guide:

Extra Coarse (70 grit), Coarse (120 grit), Medium (280 grit), Fine (600 grit), Extra Fine (1,000 grit)

Additional Options

Reviews

1 Comment

L.Johnson
Feb 21st, 2014
This is the first diamond stone that I have used. It does cut fast. You will need the course if your tools or knives are in bad shape. Have since bought a fine stone and it is closer to a finish. I use a hard Arkanas to finish. The extra fine diamond may be better to finish up with. Should have had diamond stones a long time ago.

LJ

Add a Comment

Your email will not be publicly displayed.

Captcha Code

Click the image to see another captcha.

Instructions

Diamond Bench Stone Instructions

Step 1 - Select the proper stone for your edge.

  • Extra Course-Course- For a completely dull or damaged edge
  • Medium- To maintain an already sharp edge
  • Fine- Extra Fine- to hone/polish a finished edge

Step 2 - Set the stone on a stable, flat surface.

Note: Do not use lubrication of any kind on the Diamond Stone Surface.

Step 3 - Observe the bevel angle on the blade you intend to sharpen.  Then, bring the edge to the stone matching your sharpening angle to the bevel angle.

Step 4 - Using light pressure, push the edge of the blade across the stone in one motion, much like trying to slice a thin layer off the top of the stone. Maintaining a consistent angle is essential for the best results.

Step 5 - Repeat process 3-4 times on one side of the blade, then switch to the other side and repeat.

Step 6 -  Repeat this process until edge is sharp.

Step 7 - Make sure to clean your stones with a damp rag after each use.  Store in a cool dry place.

 

Suggestions

1. Use a series of stones for the best results.  Course -> Medium -> Fine -> Extra Fine.

2. Start with 3-4 strokes per side. Repeat this process 3-4 times. 

3. Then 2 strokes per side.  Repeat this process 2-3 times. 

4. Then 1 stroke per side.  Repeat this process 1-2 times.

5. Then move on to a finer stone.

*More advanced techniques will be featured on the Lansky Sharpening Blog

Be Smart, Be Safe and Stay an Edge Above the Rest!

CAUTION: Knife sharpening is an inherently dangerous activity. Used properly this sharpener cannot hurt you but a carelessly handled blade or pointed object can.

Designed To Sharpen: